25 mil x 1/4" x 108' Gray Acrylic Tape
25 mil. high bond tape is a double sided high performance acrylic based adhesive tape, especially designed for a wide variety of materials with high and medium surface energy such as glass, glass / epoxy, muntin bars, stainless steel and galvanized steel. This tape is capable of absorbing differing thermal expansions of two different materials. This series of high bond tape maintains high impact resistance even at temperatures below 32 F˚ (0 ˚C).
Prevents shear stress on both substrates during bonding. Due to its conformability, 25 mil. is capable of bonding a variety of different thin and structured materials full surface and tension free. Furthermore, high bond tape is useful in a wide variety of applications like reinforcement of profiles on aluminum, road signs, and various types of plastics such as nylon, polycarbonate, rigid PVC or ABS. This acrylic foam tape has a very high temperature resistance and is suitable for pre-powder coating applications. In combination with a primer the 25 mil. tape family guarantees excellent adhesion performance.
25 mil. tape has a closed cell structure, which is wind and water resistant. Because it is 100% acrylic based high bond tape, it will form an almost indestructible bond between the materials. This family is resistant to UV, ageing, softening agents and solvents (offers good plasticizer resistance). These tapes bond immediately and offer a perfect resistance to the peel and shear loads that can affect a bond. 25 mil. series tapes are very well suited to absorb dynamic loads as they are viscoelastic. They can act as a sealant, form a permanent tension free bond, and bond many different types of synthetic materials.
|Adhesive||High Performance Acrylic|
|Adhesive Carrier||Conformable Closed Cell Acrylic Foam|
|Coating: Liner Side||Direct Foam|
|Coating: Open Side||Direct Foam|
|Roll Length||108' | 33m|
|Thickness||0.025" | 0.64mm|
|Width||0.25" | 6.35mm|
|Tolerance||± 0.004" | 0.10mm|
|Density||55 lb/ ft³ | 880 kg/m³|
|Liner||Red PE film|
|Peel Adhesion (ASTM D 3330)||18 lb/in | 310 N/100mm|
|Normal Tensile (ASTM 897)||107 lb/in² | 740 kPa|
|Dynamic Shear||71 lb/in² | 490 kPa 20min|
|Overlap (ASTM 1002)||93 lb/in² | 640 kPa 24h.|
|Static Shear (ASTM 3654)||97 lb/in² | 670 kPa|
|Long Term||320 °F | 160 °C|
|Short Term||464 °F | 240 °C|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: